100% of our hose assemblies are tested.
Mid-State Aerospace, Inc. is a fully authorized distributor and hose fabricator for Parker/Stratoflex. Our stock hose assemblies are ID’d, tested, and shipped in 2- 3 days. Products listed here do not represent the entire line of products available from MSA. Contact us for more information!
Aerospace
Hose 101
Lightweight, low pressure, high temperature, engine hose. Developed for Pratt & Whitney for the F119 Jet Engine. It is lighter than 124 and has a better bend radius.
Specification Reference: SAE AS4897 & AS150 TYPE IaB
Temperature Range: -65 to +450ºF (-54 to +232ºC)
Reinforcement: Corrosion-Resistant steel wire braid
Application: High-temperature fuel or lube systems with pressures below 1000 PSI, requiring lighter weight and smaller bend radius.
Aerospace
Hose 111
High-Pressure Hydraulic Hose.
Specification Reference: MIL-H-8794
Temperature Range: Size -3 thru -12:-65 to +250°F (-54 to +121°C) Size -16 thru -48: -40 to +250°F (-40 to +121°C)
Reinforcement: One fiber braid and one high tensile steel wire braid.
Oil Resistant Elastromeric: Oil Resistant Elastromeric
Application: Aircraft Hydraulic, pneumatic, coolant, fuel and oil systems.
Aerospace
Hose 112
High-Pressure Hydraulic Hose.
Specification Reference: MIL-H-8788
Temperature Range: -65° to 200°F (-54 + 93°C)
Reinforcement: Two or more high tensile steel wire braids
Inner Tube: Compounded Seamless Polychloroprene
Application: 3000 PSI hydraulic systems, air or inert gas. For gaseous service, the cover should be perforated.
Aerospace
Hose 124
High Compatibility, Non-aging, multi-applicable.
Specification Reference: MIL-H-27267, AS1946, MIL-H-25579
Temperature Range: -65 to +450ºF (-54 to +232ºC)
Reinforcement: Corrosion-Resistant steel wire braid(s) (Suffix “Z” indicates two-wire braid construction)
Inner Tube: Extruded, conductive PTFE
Application: High temperature, medium pressure, aircraft, and missile fuel, lube oil, coolant, hydraulic, ballistic and pneumatic systems.
Aerospace
Hose 130
Preferred over military standard assemblies because of less weight and small bend radii.
Specification Reference: Similar to MIL-H-8794
Temperature Range: -65 to +300ºF (-54 to +149ºC)
Reinforcement: One fiber braid and one wire braid of high tensile steel wire
Inner Tube: Seamless oil-resistant compounded inner-tube
Application: Medium pressure service with petroleum base fuel and oil.
Aerospace
Hose 156
Medium Pressure Lightweight Engine Hose. Most common rubber hose for general purpose use. Preferred by helicopter OEMs. Replaces 113, 123 & 176.
Meets the dimensional requirements and meets or exceeds the functional requirements of MIL-H-83797 with an improved inner tube of HSP® for better high temperature resistance. See information bulletin IB-1030 for TSO approvals.
Specification Reference: MIL-H-83797
Application: Medium Pressure service with most petroleum base oils, JP Fuels, aviation gasoline, lubricants, and many synthetic-based fluids.
Reinforcement: One and One-Half Corrosion Resistant steel wire braids
Inner tube: Seamless HSP oil-resistant compounded inner-tube
Tube: Seamless HSP® elastomer.*
Temperature Range: -65 to +300°F (-54 + 149°C)
Aerospace
Hose 170
Heavy Duty 3000 PSI, non-aging aircraft hose. This hose is commonly used for high vibration applications where extreme integrity is required, such as at the hydraulic pump outlet.
Specification Reference: AS604 (FORMERLY MIL-H-38360)
Temperature Range: -65 to +400ºF (-54 to +204ºC)
Reinforcement: Corrosion resistant steel wire
Inner Tube: Extruded, conductive PTFE
Application: High temperature and high-pressure aircraft and missile hydraulic systems in high vibration applications.
Aerospace
Hose 171
Lightweight 3000 PSI, non-aging aircraft hose. This hose is commonly used for high vibration applications where extreme integrity is required, such as at the hydraulic pump outlet.
Specification Reference: AS1339 (FORMERLY MIL-H-38360), AS1624
Temperature Range: -65 to +400ºF (-54 to +204ºC)
Reinforcement: High-density braid of small diameter Cres wire
Inner Tube: Extruded, conductive PTFE.
Application: High temperature and high-pressure aircraft and missile hydraulic systems.
Aerospace
Hose 191
High-pressure landing gear hose. Covered with black/yellow Cordura™ for exceptional abrasion resistance.
Specification Reference: AS1339 (FORMERLY MIL-H-38360)
Temperature Range: -65 to +275ºF (-54 to +135ºC)
Reinforcement: High-density braid of Corrosion resistant steel wire
Inner Tube: Seamless extruded, conductive PTFE
Application: High-Pressure aircraft hydraulic systems (landing gear)
Aerospace
Hose 193
Low-Pressure Engine Hose
Specification Reference: MIL-H-5593
Temperature Range: -65 to +165°F (-54 to +74°C)
Reinforcement: One braid of high tensile fiber cord
Inner Tube: Compounded Seamless Buna-N
Application: Vacuum service 20″Hg sizes -2 thru -6; 10″Hg sizes -8 and -10
Industrial
Hose 213
Medium pressure service hose
For use with: Petroleum-based hydraulic fluids and lubricating oils, diesel fuels, crude, fuel oils, antifreeze solutions, water, water/glycol, water/oil emulsion hydraulic fluids, and air.
Primary Application: Transportation air brake hose,
Compressors compressed air hose
Applicable Specifications: SAE J1402AI, D.O.T. FMVSS 106-AI
Inner Tube: PKR synthetic rubber
Reinforcement: One fibre braid, One high-tensile steel wire braid.
Cover: Rubber layer and black textile braided cover include 2 green strips.
Temperature Range: -45 C up to +150 C, with the exception of Air (max. +100 C) and Water (max. +85 C)
Industrial
Hose 285
Air conditioning and Refrigerant hose.
For use with: Refrigerant 12, 134a and 22óSAE J2064 Type C, Class 1
Inner tube: Nylon barrier between two elastomeric layers
Reinforcement: One textile braid
Cover: Heat, moisture and ozone resistant rubber
Temperature Range: -30 C up to +125 C
Industrial
Hose 301
Medium pressure hydraulic (No Skive) hose. Universal two-wire hose design manufactured to international specifications (ISO 1436-1 Type 2SN). Meets ISO 1436-1 Type 2SN, SAE 100R2 Type AT, and EN 853 Type 2SN, rated at a 4:1 burst pressure.
For use with: Petroleum-based hydraulic fluids and lubricating oils, water, water/oil emulsion, water/glycol hydraulic fluids and air.
Applications: Automotive plant applications, forestry equipment agricultural equipment, construction equipment.
Inner tube: Nitrile inner tube for better fluid compatibility with a larger array of hydraulic fluids, including biodegradable ones
Reinforcement: Two braids steel wire
Cover: Synthetic rubber
Temperature range: Petroleum-based hydraulic fluids of -40°F to +212°F
(-40°C to +100°C), Water, water/oil emulsion and water/glycol up to +185°F
(+85°C), and Air up to +158°F (+70°C)
Industrial
Hose 381
Medium pressure hydraulic (No Skive) hose.
For use with: Petroleum-based hydraulic fluids and lubricating oils, Polyol ester based hydraulic fluids, water, water/oil emulsion, water/glycol hydraulic fluids, and air.
Industrial
Hose 422
Medium pressure (No Skive SAE 100R1) hose
For use with: Petroleum-based hydraulic fluids and lubricating oils, water, water/oil emulsion, water/glycol hydraulic fluids, air, and gas.
Military
MIL-DTL-13444 Type I
Application: Low-pressure oil and fuel used in automotive applications.
Military
MIL-DTL-13531 Type II, Class A
Application: High pressure hydraulic, grease, oil, fuel and water service.
Military
MIL-DTL-8790
Application: High pressure (3000 psi) hydraulic systems, air, or inert gas.
Military
MIL-DTL-13531 Type I, Class A
Application: Medium pressure hydraulic, grease, oil, fuel, air, water, and many other fluids and gases.
Military
MIL-DTL-6000C
Application: Medium pressure hydraulic, grease, oil, fuel, air, water, and many other fluids and gases.
Military
MIL-DTL-25579
Application: High temperature aircraft and missile fuel, lube oil, coolant, hydraulic, ballistic and pneumatic systems.
Ready to buy a hose assembly? It’s just a click away.
